The cured colored sand caulking agent is very hard, and the possibility of direct removal is very small, while the adhesion of epoxy colored sand is very strong, so it is difficult to remove it by hand as long as it sticks in the gap.

It cannot be eradicated by brute force. It is necessary to use an industrial hot air gun to heat the solidified colored sand with hot air to soften it, and then pick out the softened colored sand with an air cone. Although the hardness of colored sand is not high, it is sticky, and it needs to be carefully cleaned before gluing.

The uncured sealant is sticky, especially colored sand, but it is also easy to clean. You don't need a hot air gun, just pick out the colored sand with a breeze cone. Colored sand belongs to water-based products. If you accidentally get it, you must clean it up in time.

The residual colored sand in the gap can also be wiped clean with a wet towel. But before the next construction, the gap must be thoroughly dried, so as to redo the beautiful seam, otherwise the moisture will affect the beautiful seam effect.

Brief introduction of epoxy colored sand;

Epoxy colored sand mainly refers to epoxy colored sand caulking agent, which belongs to a kind of ceramic tile caulking agent. It consists of two parts: group A is the mixed slurry of epoxy resin and filler, and group B is the mixed slurry of epoxy curing agent and filler.

Epoxy colored sand caulking agent belongs to reactive resin caulking agent, code RG, solvent-based epoxy colored sand, code (I); Waterborne epoxy colored sand, code (Ⅱ). Decorative caulking of indoor and outdoor tiles in home decoration. It is also suitable for acid-resistant tiling of various base surfaces of buildings.