You can make a beaded bracelet, the required colorful rope as well as beads can be bought in stationery stores,

Practice:

Required materials: foam board, big head pin, rope, beads, scissors

Step by step

1.Place the rope in the right position as shown in the picture, and then use the big head pin to fix the rope.

2. Lap the right string to the left on the center string.

3. Hitch the left rope to the bottom rope.

4. Take the rope above the cross and pass it through the hole on the right from bottom to top, then pull both ropes tight.

5. Repeat the previous step in the opposite direction. (? First, take the rope on the left side to the right over the center rope, then take the rope on the right side over the lower rope. Finally, take the rope above the cross and pass it from bottom to top through the hole on the left.

6. Pull the ropes on both sides tightly so that a flat knot is woven.

7. Weave one end of the flat knot, then thread on a bead, and finish by hooking the left and right strings into the flat knot with a crochet hook.

8. In order to make the bracelet flexible, we also need to fold the two ends of the rope together, and then add a rope in the middle to create a new section of flat knots.

9. Thread the two ends of the rope into the small beads, and then at the end of the rope to tie a dead knot can be, as shown in the picture above, a beautiful beaded bracelet on the production of good.?