1. Prepare the materials to be processed, wash them and put them into the wall-breaking machine, and sometimes add some water appropriately.

2. Then plug in the power supply, cover the top cover, and press the function key on the wall breaker as needed. There are soybean milk, vegetables, nuts and other choices.

3. Finally, press the start button, and the wall breaker will start running.

Please note when using the wall-breaking machine:

1. Pay attention to the water displacement: when beating soybean milk, making rice paste, frying fruit and vegetable juice with a wall-breaking machine, etc. You need to put a proper amount of water in the container (cup) of the wall breaker. The container has the maximum limit for making hot drinks and cold drinks. Be sure to see the maximum limit of "cold" and "hot" scales (different heights), otherwise it will easily lead to overflow.

2, pay attention to the amount of food: when buying a broken wall machine, a measuring cup is randomly equipped. Every time you make soybean milk, rice paste and thick soup, you need to use this measuring cup to hold food, one cup at a time (the water level is at the corresponding upper limit). This ratio is more suitable for making soybean milk, rice paste and thick soup, otherwise it is easy to paste the pot, especially rice paste, which not only affects nutrition and taste, but also makes it easy for the broken wall machine.

3. Pay attention to the position of the cover: the covers of various wall-breaking machines have different forms, and the basic principle of alignment is basically the same. Generally, the knob on the lid should be aligned with the handle position on the glass container (there are signs on the wall-breaking machine), but some signs are obvious, while others are not. Before starting the machine, check whether the position is aligned, whether the cover is flat and whether it is stuck in the rotating groove. Otherwise, it will cause more serious injury consequences.

4. Pay attention to the position of the cover in the cover: generally, there is a small rotating cover above the big cover. Some structures on the small rotating cover have grooves, and some do not. Before starting the machine, it is also necessary to check whether the position of the cover is in the slot. The switch direction is generally marked on the cover. If there is no logo, you can open it in the direction specified in the manual before using it.