Ganoderma lucidum planting method cultivation technology is as follows:

I. Planting method: Before inoculation of Ganoderma lucidum strains, fresh logs are cut into small segments of 30 centimeters, and then the residual pin-prick-like material around the cross-section is trimmed with a scraper and 3 holes with a drill of 1.8 centimeters in diameter and 3 centimeters in depth are made, and put into a low-pressure polyethylene bag with 2-4 segments per bag and then closed the bag and tied it tightly with a rope and put it into the inoculation room. Each bag of 2-4 sections, and then close the mouth of the bag with a rope tied tightly into the inoculation room, with a 45-watt soldering iron in the position of the section of wood holes scalded through the bag membrane, and the use of long tweezers clamped into pieces of strains to fill the holes, and finally sealing and pasting the special adhesive tape can be.

Two, cultivation techniques: control the temperature, Ganoderma lucidum is a high-temperature type of fungus, mycelium growth range of 15 to 35 degrees, suitable for 25 to 30 degrees. Cultivation time, December to early January each year is more suitable for inoculation. Higher moisture is required during the growth of the substrate. Ganoderma lucidum is very sensitive to light during growth and development, and light has an inhibitory effect on mycelial growth. Ganoderma prefers to grow in an acidic environment, requiring a pH range of 3 to 7.5, with PH 4 to 6 being optimal.

Reishi planting precautions

1, planting environment

Reishi prefers a warm environment, to choose heat preservation and moisturizing, ventilated, light, good drainage facilities shed, shed to ensure that the clean and clean, the walls are smooth, moisture-resistant, the growth of the temperature is maintained at 22 ℃ -30 ℃.

2, light and humidity

Ganoderma lucidum is extremely sensitive to light during the growth process, and mycelium does not like light, but instead grows very fast in a darker environment. In the growth stage of ganoderma fungus, air humidity is kept at 60%-70%, and in the stage of ganoderma emergence, air humidity should be increased to 90%-95%, and water spraying should be increased to keep the water moisturized in the gradual formation of the mushroom cover.

3, cultivation substrate

Ganoderma lucidum is a kind of putrefactive fungi, the preparation of raw materials available cottonseed hulls, wood shavings, bran, gypsum powder, cornstarch and other raw materials, moisture content of 60% -65%, mixing and even with the bag after the bag, moved into the culture room, to ensure that the temperature of the bag is balanced to ensure that the bag of oxygen, to promote the growth of mycelium, during the period of time to check whether there are infected with green mold fungus bags and timely treatment.