The United States of America automatic soybean milk machine method, *** divided into six steps:

1, in the production of soybean milk according to their own needs to take out the appropriate amount of ingredients at the same time according to the measuring cup and model to determine how much material to take. In the production of soybean milk need to be prepared soybeans soaked in water.

2. Put the prepared ingredients into the measuring cup after washing, and add water to the upper and lower levels.

3, the soymilk machine's five grains of fine grinding in accordance with the instructions of the soymilk machine instructions for the direction of the installation of the soymilk machine, so that the five grains of fine grinding and the lower cover of the seamless tight connection between the installation is completed, and then double-checked to see whether the installation is in place.

4, the head in accordance with the true position into the cup, plug the power cord of the soybean milk machine, wait until the indicator light of the soybean milk machine is fully lit, press the required function key, the corresponding indicator light, and at the same time start the corresponding production program.

5, until the soybean milk machine in accordance with the set program for the operation of the pulp, soybean milk after sufficient boiling, the machine issued a prompt soybean milk production is complete.

6, will make good soybean milk pour out, the machine clean.

The United States of America soybean milk machine maintenance methods:

1, the head of the machine with water to rinse off the bottom of the adhering soybean milk, but do not submerge the head in water, do not use water to clean the head, to prevent water from entering the head.

2, cleaning the grains fine grinder must be cleaned to avoid residual soybean milk produced by the odor.

3, clean the electric heater with a cleaning block to avoid the next use of the paste flavor.

4, use the cleaning block to clean the cup, clean the bottom and sides of the cup.

5, place the soymilk maker in a dry and ventilated place.

6, don't use the soybean milk inside the cup when the soybean milk maker doesn't finish the working program normally.