At home you can follow the simple grapevine method tutorial for the construction of the grapevine, determine the ventilation near the location of the grapes, ready for wooden materials, the pillar cuttings directly into the soil to make it stable, no soil can choose pots as cuttings substrate. Subsequently, in the pillar to build criss-crossed bracket, fixed with a rope tied, pay attention to maintain the stability of the grape frame and load-bearing, and then hang down the rope or branches for the grapevine lead frame processing, so that it grows along the bracket can be.

1, location materials

In the construction of simple grapevine, to determine the location of the grapevine, which needs to be constructed in a well-ventilated outdoor. Then to prepare the materials to build, generally choose wood or bamboo frame as a support, do not choose iron frame, will make its thermal conductivity too fast so that the grapevine was burned.

2, strut into the soil

In the simple grapevine tutorial to do a good job of strut into the soil, the strut cuttings directly into the soil, cuttings need to be based on the actual depth of judgment, as long as to ensure that the strut will not be askew can be. If you don't have soil at the stent, you can choose to put pots at the bottom of the stent to take cuttings.

Put pots for cuttings need to pay attention to the size of the pots, you can choose a deeper and appropriate mouth pots, filled with the right amount of soil, so that it stabilized on the ground. Then insert the prepared bracket cuttings into the pot and keep them in an upright position.

3, build the bracket

After setting up the pillar, you need to build the bracket. At the top of the pillar, put the bracket into a crisscross shape, so that it becomes a tight network, and then use the rope to tie the bracket tightly. The rope can choose to use bamboo rope, will be more conducive to the climbing of grapes.

When building the bracket, you need to pay attention to its stability and load-bearing, after the rope tied fixed can shake the bracket, to ensure that it does not appear to fall over. If there are a lot of vines, the column should be tied to make it more fixed, to avoid insufficient load-bearing collapse.

4, lead vine on the shelf

After building a good grapevine near the vine, you need to lead the good climbing vines to the grapevine on the shelf. You can prepare some thin rope or branches on the grapevine, so that it hangs down close to the branches of the grapes, and then the branches will follow the rope to climb on the shelf growth.