1. Take off the outer packaging, and take out the attached document bag, water inlet pipe, drainage pipe, ice scoop, gasket and other accessories from the ice bank.

2. Place the ice maker in a ventilated place, keep a space of not less than 150mm from the wall, and stay away from the heat source to ensure the machine is placed stably.

3. Connect the attached 12 flexible plastic corrugated drain pipe with the water outlet pipe 7 at the back of the machine, and place the other port in the water storage box (self-equipped) or sewer.

4. Connect one end of the randomly attached water inlet pipe to the tap with a 3/4 "threaded joint of the potable tap water supply pipe. The water pressure of the water supply pipe is 1.5-3kg/cm2, and the other end is connected to the threaded joint 6 of the water valve at the back of the ice maker. Note that when connecting, both ends of the water inlet pipe should be provided with gaskets (randomly).

5. Unscrew the tap to ensure smooth water flow in the inlet pipe.

6. Plug in the power plug and press the rocker switch on the operation panel. At this time, the ice maker starts to work. The ice maker makes ice, deices and stores ice automatically and continuously. If the amount of ice in the refrigerator reaches a certain level, the full ice light on the operation panel 2 will light up and the ice maker will stop automatically. When the external water supply pipe (or pure water supply system) fails to supply water, the water shortage light on the operation panel of the ice maker will light up and the ice maker will stop automatically.

Source: www.89-china.com.