1, set the prefabricated timer time (if you do not want to prefabricated timer, omit this step). Press the "timer" key display increments 0.5 hours, "timer" key cycle settings. You can set the preset timer for up to 8 hours.

2, according to the cooking food selection menu key, and press the selected menu key (such as cooking, press the "cooking" key) Timing light, the selected menu indicator light.

3, if you do not set the prefabricated timer, the display begins to decrease every 0.5 hours, when the countdown is complete, the display shows "00", the timer light off, start heating.

4, if there is no set timer, press the menu key (such as soup, press the "soup" key), then the selected menu indicator light, start heating.

5, when the heating and pressure process is completed, ring a bell, the work indicator light off, keep warm indicator light flashes (indicating that the pressure in the pot is higher), to keep warm state. When the pressure in the pot is low, the heat preservation lamp is always on.

6, set the parameters or in the process of work, press the "keep warm / cancel" key to cancel the settings and work status.

7, in the absence of setting parameters or not work, press the "insulation / cancel" key, insulation indicator light, into the insulation state, and then press the insulation indicator light off, cancel the insulation state.

Electric pressure cooker soup is mainly pressure time, its pressure time is generally about 35 minutes, this pressure time refers to the water boiling, the pressure in the pot to reach the set pressure began to calculate, so the general United States of America electric pressure cooker soup If you start from the heating of the calculation of the roughly 50 to 65 minutes or so.