Tools/materials: matsui dehumidifier SJ- 12 1E, bull power socket.

1. First, plug the dehumidifier into the power socket. At this time, you see many buttons on the panel. First, press the switch button on the panel to turn on the dehumidifier, as shown in the figure below.

2. After the power is turned on, the dehumidifier will start to work at this time, and there will be an air outlet in front for dehumidification.

3. Many functions will be displayed on the panel. Humidity represents the humidity of indoor air, which will decrease during dehumidification. There are two buttons under the humidity to adjust the humidity control, one is to turn it up and the other is to turn it down.

4. In addition, the interface can also set dehumidification time, timing setting and setting time, and the dehumidifier will work for the corresponding time, and then stop working.

5. There is also the running state of the dehumidifier and the cleaning of the filter screen. This is the default value. The other is the water full indicator. The water is full. In order to prevent the water from overflowing, the interface will prompt that the water is full and light red. At this time, just pour out the water and reinstall it.