1. Wrap the binding tape around the binding object, hold the handle and press the binding tape handle, and put the overlapping part of the binding tape into the binding tape slot neatly.

2. Gently push the strap into the innermost side of the tape slot with the fingers and thumb of the left hand, which can help the strap to quickly achieve a neat positioning effect.

3. Press the coiling indicator light to turn green. Please wait 1 sec, and then press the tension button to tighten the strap. When the set kilograms are reached, the machine will stop automatically.

4. Pull the bonding knob directly to the bottom, and then gently press the bonding knob. For example, the operation indicator light is green, which will start bonding and cut off the excess packaging tape.

5. When the green light stops flashing, the green light lights up again and there is a buzzer, indicating that the bonding cooling has been completed. After the bonding is completed, pull the bonding knob back to the closed state, press the belt pressure handle by hand, gently lift the rear end of the machine, and move it laterally to the right to separate the strap.