Current location - Recipe Complete Network - Complete vegetarian recipes - How to use the automatic vacuum packaging machine?
How to use the automatic vacuum packaging machine?
The vacuum packaging machine can automatically pump out the air in the packaging bag and complete the sealing process after reaching the predetermined vacuum degree, which is suitable for many industries. Automatic vacuum packaging machine can realize automatic operation, which is very convenient and simple to use. After checking and adjusting the machine settings, the machine will automatically vacuum package according to the setup program. When using vacuum packaging machine, we should also pay attention to safe operation, such as using appropriate power supply and regular cleaning. Let's learn about the use of automatic vacuum packaging machine. How to use the automatic vacuum packaging machine?

The vacuum packaging machine can vacuum package articles to prevent them from oxidation, mildew, moth-eaten, rot and moisture. With the development of technology, there has been an automatic vacuum packaging machine with unmanned operation and automatic packaging. So how to use the automatic vacuum packaging machine?

1, preparation before use

(1) is equipped with a power supply that meets the model requirements.

(2) Check whether the oil level position of the vacuum pump is correct, and if not, adjust it.

(3) Ground the machine, turn on the power supply, turn on the power switch and close the cover to see if the vacuum pump works normally.

2. Adjustment before use

(1) Select the vacuum degree, and the pumping time is 0-99.9 seconds. Small vacuum machine, the vacuumizing time is 0-60 seconds, and the vacuumizing time is adjustable.

(2) Select the heating temperature, select the required heating temperature according to the packaging bag material, and adjust the heating temperature knob to the corresponding position, high, medium and low.

(3) Adjust the heating time. The heating time is 0-9.99 seconds, which can be continuously adjusted by digital display. Adjust the heating time knob, and select the appropriate heating time according to the packaging material used and the heating temperature.

(4) Select the silicone word for sealing the mouth of silicone rubber strip as required, and set the sealing date and other characters.

Step 3 use

(1) Turn on the power switch.

(2) Turn the batten of the packaging bag upside down, put the packaging bag full of packaged goods into the studio, put the sealing place flat on the silicone rubber strip, and turn the batten of the packaging bag upside down to press the mouth of the packaging bag.

(3) Hold the handle (or press the edge of the upper cover), press the upper working chamber and close the cover. The machine will automatically complete the vacuum packaging process and automatically open the lid according to the program.

(4) Open the batten of the packaging bag and take out the packaging bag, thus completing a working cycle.

(5) Turn off the power switch and pull out the power plug when it stops working, so as to avoid burning out the solenoid valve when it is electrified for a long time.

Second, the safe use of vacuum packaging machine specification

1, keep the use environment of vacuum packaging machine clean and tidy, and the use environment should not be too wet. Don't use vacuum packaging machine in harsh environment such as inflammable and explosive.

2. The vacuum packaging machine should be used in an environment where the temperature is-10℃-50℃ and the relative humidity is not more than 85%; Because the environmental humidity is too high, it will damage the electrical components in the equipment and reduce the service life of the equipment.

Please unplug the power plug when repairing the machine to prevent electric shock.

4. The three-phase four-wire machine should be equipped with the same type of socket consistent with the machine power supply, and meet the requirements of three groups of four-wire power supply; Single-phase machines should be equipped with three-pole power sockets, and ensure that the machine is reliably grounded.

5. Keep the vacuum part in the best clean state and wipe the inside of the machine regularly. The oil of the vacuum pump can only be added to two-thirds of the oil window of the vacuum pump, and it should be used and maintained in strict accordance with the operating instructions of the vacuum pump.

6. Before using the vacuum packaging machine, the technicians should be trained accordingly, because the technicians of the control system will debug the equipment before leaving the factory. Without training, the equipment will be changed. If the operation is improper, the equipment may not run and the control system will be chaotic.