The basic method of making tables

The production method is as follows: 1. Open the WPS form and create a new workbook; 2. And then in the many forms in the table to choose the number of rows and columns they want to make the table; 3. After the toolbar above the Insert function, find the table; 4. Double-click the form will pop up a dialog box, and then choose OK; 5. Finally, the last in the region you choose will automatically generate a table so that a simple form is done. That area will automatically generate the form, so a simple form is done.

Method 2: 1. Open the WPS text and then create a new document; 2. Then find the Insert function in the upper toolbar under the table; 3. After selecting the number of rows and columns of the form; 4. Select the number of rows and columns will be automatically generated in the document will automatically generate the number of tables.

How to use the table?

How to create a form, novice, a blank, say a little more detailed

Creating a form to open a blank Word document for the production of forms to practice.

Creating a form can usually be divided into two major steps: the establishment of the form and to the form of input content. (1) create a form form of three ways: menu, toolbar buttons and free tab way.

Note that the location of the form is established in the document off the table where the location. The following first one by one to establish the form of practice: ① menu way to establish the form to open the "Form" menu, pointing to the "Form", select "Insert" item; in the dialog box to make the necessary settings to choose (it is recommended that the rows and columns of the settings of the moderate), and then press "OK".

Observe the resulting table. ② directly click on the toolbar "Insert Form" button, use the mouse to appear in the form box to select the appropriate rows and columns, and then click the left mouse button; observe the establishment of the form.

③ Click on the toolbar "Forms and Borders", or right-click the mouse on the toolbar, in the Tools menu, select "Forms and Borders", open the "Forms and Borders" toolbar; in this toolbar, select the appropriate lines, and then click on the toolbar on the left side of the brush button, then the mouse logo into the form of the brush, then, you can draw in the document in the form of free drawing. Drawing method is: hold down the left mouse button to move the mouse, and then release the mouse, you can get a rectangular box or a straight line.

Lines can choose the thickness, you can also choose the "borderless" line format (drawn lines for the gray, print colorless). Wrongly drawn lines can be erased using the "Erase" button method.

Practice drawing a four-row, four-column table with free tabbing. You can also add or erase lines in the built table by using the freehand method, so please practice it by yourself.

(2) Entering Content into a Table Once a table is created, each cell defaults to a paragraph. To enter content into the form, first move the document cursor to the cell where you want to enter content.

Please practice typing in the created form and observe the changes in the form after entering different amounts of content. (3) Delete Forms Move the document cursor to any cell in the form, open the "Forms" menu, select "Selected Forms"; then open the "Forms" menu, select "Delete Row", you can delete the form.

Please use the above method will have just created all the forms to delete one by one. Form editing and layout of the form before editing and layout, please open the "Forms and Borders" toolbar.

(1) Editing Forms The editing of forms includes changing the rows and columns of the form, modifying the structure of the form, etc. Please create a three-row, three-column form first. Please first establish a three-line, three-column form, and then practice the following operations: (1) Increase the line Move the cursor to the end of any line (outside the form), press the Enter key once, the form to increase a line; and then move the cursor to any cell, open the "Form" menu, pointing to the "Form", select "Insert Line", the form will also increase a line.

2) increase the columns Open the "Forms" menu, point to "Forms", select "Insert Columns", the form will also increase a column. (3) split cell cell split is not only a cell, can also be a group of cells, can also be a line or a column, split before you select the cell to be split.

In the case of selected cells, quot; Forms and Borders "toolbar" on the "Split Cells" button, or in the "Forms" menu, select "Split Cells", in the emergence of the "Split" dialog box set up to split points. Please use the above methods to split the practice.

4) merge cells in the form of holding down the left mouse button, drag from one frame to another can be selected from a continuous cell, if you want to select the entire line, you can be outside the boundaries of the left side of the line, the mouse arrow right oblique click on the left button; hold down the drag can be selected from a number of consecutive lines. In the case of a number of consecutive cells selected, press the "Forms and Borders" toolbar on the "Merge Cells" button, or in the "Forms" menu, select "Merge Cells", the selected cells are merged into one.

Merge cells can also be used to erase the lines between cells to achieve. (5) adjust the width of the rows and columns of the mouse to point to any line in the form, the mouse logo will become a double arrow shape, then hold down the left mouse button and drag, you can change the width of the rows or columns.

Note that the horizontal line moves up and down, and the vertical line moves left and right. Adjustments to the width of rows and columns can also be made on the horizontal and vertical rulers.

6) move the position of the form in the upper left corner of the form there is a small cross arrow mark, with the left mouse button press and hold it to drag to move the position of the form. In the lower right corner of the form there is a small square marker, hold it down with the left mouse button and drag to change the size of the form.

Please use this feature to center the entire table in the document and make the table the right size. (7) uniform distribution of rows and columns Select the entire form, in the "Forms and Borders" toolbar, respectively, click on the "average distribution of rows" and "average distribution of columns" button, the form of rows and columns into a uniform distribution.

(2) the form of editing the content of the form of editing and Word common document editing method is the same, the content of each cell is equivalent to the content of an independent paragraph. (3) the layout of the form of the first form of the appropriate width of the left and right to narrow, and then adjust the entire form to the center of the document, and then do the following: ① "Forms and Borders" toolbar "Align" button, the last line other than the rows are set to vertical center; ② "Forms and Borders" toolbar "Align" button, the last line is set to the bottom of the Alignment; the form of the direction of text can be use the toolbar "Change Text Direction" button to adjust.

(4) automatic formatting In addition to the default grid format form, Word also provides a variety of table styles, these table styles can be used automatically apply the method to use: ① in the insertion of the form apply Insert a table, set up after the rows and columns, press the "Auto Apply Format" button, select the format you need. ② already exist in the form of applying the cursor to the form, open the "Forms" menu, select "Forms automatically apply formatting", and then select the format you need.

How to do the table steps

1, right-click the mouse on the desktop to create a new excel file

2, left-click the box to do the table of the domain area, and then right-click the pop-up window, move to set the cell format

3, click on the "Borders" in the "Preset" menu. "Preset" were repeated in the selection of the outer border - OK and internal - OK

4, this has been a simple table

5, click on the table header, select the cell ready to be used for the title

6, right-click the pop-up window to move to set the cell formatting, click the "Alignment"

7, check the following "merge cells", click OK

8, you can start to enter all the contents of the table to be produced

How to use excel to create all the tables

excel make simple form

1, open excel, fill in the information as needed, as shown in the figure:

2, fill in the good, selected editing area, right mouse button, click on the set cell formatting, as shown in the figure:

3, enter the "cell format" small window Click on the border - - outside the border - - inside the border - - OK, as shown:

4, the table is produced. As shown:

Table how to do

1, create a new excel file

2, open the file, the cursor will be positioned in one of the sheet.

3, according to the contents of the form, enter the contents of the cells in the sheet. Form a box to enter in a cell inside, another box to enter in another cell inside.

4, after losing, select the form area, right mouse button: Set Cell Format - Border tab, click the mouse below the border in the top, bottom, left, right and center of the six positions, for the form area plus the border

5, insert a line, enter the table title, and then select and the form of equal width of the cell area, the right mouse button: Set Cell Format - Alignment tab, in the text control : merge cells before the small box before the check box can be.

6, you can select the appropriate region, the use of formatting menu bar in the font font, font size, bold and other shortcuts to modify. If there is no format menu bar, with the right mouse button in the right-hand side of the menu blank click, select "format" can be.

7, save the file, through the "File - Print Preview" set the print page and print.

EXCEL form how to make

EXCEL form production is actually very simple, at first open a blank form, each of which is the same size of a small cell, but these can be changed on their own, so to do form, first of all, we should think about the form of the way it looks, the best is to draw a sketch, and then fill in the necessary text description to a blank form, do not want to! form and your sketch is not the same size, (can be set up) first in order to write the contents of the form, and then for the form of painting the border, you need to draw out the part of the good, redundant do not draw, and then you can according to your sketch to the form of the settings, including merging cells, center, font size, cell color, and so on the settings you can find in the toolbar of the EXECL software, the corresponding tool. Cell size (width and height) can be simply clicked by the mouse to the table at the top and left of the table line position, the mouse deformation, move the mouse to adjust, you can also right-click the mouse, select the "column width" or "line height" to fill in the appropriate The value to be set accurately.

Video is more troublesome, recommended Youku search, hope to help you!

How to make a table on the computer, ask for steps

1, first, create a new document. Click the right mouse button, a dialog box will appear. After clicking "[New", another dialog box will appear, and click "[Document", because I am using WPS. if I am using word, click [word document].

2, create a new document, double-click the mouse to enter, click Insert in the upper left corner, and then click Forms and Insert Forms into the next step.

3, click "Insert Form", a dialog box will pop up, enter the number of columns and rows required, and then click "OK" to continue the next step.

4, this time, we have a table. If we want to increase the number of rows, click the [] sign to add a row.

5, there is a [Form Tools] logo in the upper right corner. Click on it, a series of form tools will appear in the next row, including eraser erase, delete, etc.. , very easy to use.

Please click to enter a picture description (up to 18 words)