The amount of formula is 450 grams of toast mold. I used a mold with a cover.
The whole process is kneading dough by hand. There is no bread machine or chef machine. Learn to use dexterity and you can easily rub out the glove film without being too tired. The main time of baking bread is delayed in fermentation, so you must be patient and wait for every step to be fermented, and you can't be impatient.
One more thing to note is that our toast must have high water content, and the dough should be moist and not too dry. Therefore, I suggest that you set aside a little milk, and when you knead the dough later, you feel that it is not good to push and knead the dough, and then add some more.
There is a new recipe for whole wheat toast at the bottom.
Materials?
260 grams of high gluten flour
30 grams of fine sugar
Milk140g
3 grams of high-sugar tolerant yeast
25-30g of eggs
35 grams of condensed milk (no need to put it)
3 grams of salt
25 grams of butter
How to make a successful milk toast bread once (kneading glove film on hands and dough) and finally attach whole wheat toast?
All the raw materials needed for toast.
Please click to enter a picture description.
Weigh the high-gluten flour first, then the sugar and yeast, and put them aside. Stir sugar and yeast evenly in their respective positions. (The reason is to prevent the speed of yeast fermentation)
Please click to enter a picture description.
Stir well and then pour in the whole egg liquid.
Please click to enter a picture description.
Stir well and add milk. You can stir while pouring. (Reserved10g milk. After kneading the dough on the panel, it is found that the dried dough is too absorbent and can be added for use).
Please click to enter a picture description.
Knead the dough evenly, then cover the lid and wake it up 10 minute (in order to prevent the dough from sticking to hands and release the film easily).
Please click to enter a picture description.
Just wait 10 minutes.
Please click to enter a picture description.
Spread the salt in the formula on the panel and take out the middle of the basin. Knead the salt and dough evenly like in the video. I'm afraid the dough can be covered with a little oil when it's taken out and stuck to the panel, so I'll put two drops on it and it won't stick at all.
Please click to enter a picture description.
Rub it evenly and start rubbing it. First, press one side of the dough with your left hand, and gently push it forward with your right hand like a washboard (not with brute force).
Please click to enter a picture description.
After pushing it away, roll back the dough and do this action several times. But to change sides, you can't always rub each side.
Please click to enter a picture description.
Let's take a short video and have a simple look. It's a little inconvenient to record and rub with one hand, so let's make do with it. You must not use strong force. If you use strong force, your tendons will be broken, which will also hinder you from touching the membrane.
Please click to enter a picture description.
After rubbing several times, it is necessary to cooperate with the throwing out and falling face to promote the film. That is to say, if you are tired, you will fall a few times, and if you are tired, you will rub it again. Repeat these two sets of actions. (More falls will also reduce the viscosity of the dough)
Please click to enter a picture description.
You can put butter when you knead it to the picture expansion stage.
Please click to enter a picture description.
Butter needs to be put in the middle of the dough twice, put it in place and knead the dough like a washboard until the butter and dough are uniform, and then add the other half of the butter.
Please click to enter a picture description.
After kneading the butter evenly, continue to use the method of rubbing and falling to accelerate the film. I can feel it. Cut a piece of the scraper to see if it feels out.
Please click to enter a picture description.
The edge of the hole in the glove film is smooth and will not appear jagged.
Please click to enter a picture description.
Knead the dough into a ball, put it in a basin, cover it with plastic wrap and ferment. I like to coat the dough with a thin layer of milk before covering it with plastic wrap to keep the dough moist, that is, just apply a layer of milk to the dough surface with my hands.
Please click to enter a picture description.
The dough can be fermented to twice the size for the first time, usually 70 minutes. Turn off the heating at home at 22 degrees. I fermented for about two hours. (If you poke a hole in the middle of the fermented dough without deformation and retraction, the fermentation is successful. But this one of mine has been fermented, and it pokes like a balloon. ）。
Please click to enter a picture description.
The appearance of honeycomb is also a sign of successful fermentation.
Please click to enter a picture description.
Divide the fermented dough into three equal parts (each part of mine is about170g).
Please click to enter a picture description.
Simply roll into a circle, cover the plastic wrap and relax 10 minute. Plastic wrap must be covered here to keep the humidity. Don't knead the dough, and don't knead the dough like steamed bread.
Please click to enter a picture description.
At this time, you can brush the mold with oil in advance, which is anti-sticking and easy to demould. I just dropped a drop of oil on the brush, which was enough to brush the whole mold. You can do it without brushing. I found that my mold is not sticky and easy to demould. )
Please click to enter a picture description.
First, take a piece of dough from the plastic wrap and roll it into a circle (the rolling pin is coated with a little oil to prevent sticking, which is especially good for rolling).
Please click to enter a picture description.
Fold it as shown above.
Please click to enter a picture description.
Fold it down again.
Please click to enter a picture description.
Fold it into three stacks, and turn it upside down, and gently roll it into a rectangle with a rolling pin.
Please click to enter a picture description.
Pull the bottom of the rectangle down with your fingertips and stick it on the panel, as shown in the figure.
Please click to enter a picture description.
Press gently with your fingers on both sides to exhaust.
Please click to enter a picture description.
Put raisins, or you can add nothing and gently roll them up with your fingertips. Such as video.
Please click to enter a picture description.
Put it in the mold, cover it with plastic wrap or cover it (it is best to cover it with plastic wrap so that you can see the height of fermentation), and put it in the oven for secondary fermentation.
Please click to enter a picture description.
There are two methods for secondary fermentation: 1, put a bowl of 50-degree water next to the oven mold, and close the oven door for one to one and a half hours. Look at the wake-up state, it needs to be sent to 89% full (pay attention to the time and temperature when the oven is not on, it is closed. The water in the bowl is cold and needs to be changed halfway. 2. If the oven has its own fermentation function, you can adjust the oven to the fermentation function, and adjust the upper and lower temperatures to 38 degrees for 60 minutes. (Method 2 is more successful and faster)
Please click to enter a picture description.
Secondary fermentation to 89%.
Please click to enter a picture description.
Preheat at 200 degrees 10 minute, fire at 200 degrees in the middle and lower layers 18-20 minutes. (Toast is suitable for high temperature and short time)
Please click to enter a picture description.
Turn the mold upside down on the drying net, and take out the bread to cool.
Please click to enter a picture description.
The bread that just came out of the pot is really delicious.
Please click to enter a picture description.