How to install the system using Laomaotao? Laomaotao is a relatively well-known U disk boot disk installation tool. It can make a U disk into a boot disk and use it to install or reinstall the system on the computer. Some users plan to use a U disk to install the system, but they don’t know how to install the system on Laomaotao. In fact, the steps to install the system on Laomaotao are not difficult. First, make the U disk into a Laomaotao U disk, and then set the computer to boot from the U disk. The editor below will share with you how to install the system using Laomaotao.

Installation instructions:

1. If the current computer does not have a system or the system is damaged, you need to use another computer to make a Laomaotiao U disk

2. General A 32-bit (x86) system should be installed if the running memory is less than 2G, and a 64-bit (x64) system should be installed if the running memory is 4G or more.

1. Installation preparations

1. Operating system: Zhongguancun ghostwin 764-bit flagship Pure version v2018.11

2. 4G or so U disk: Laomaotao U disk boot disk production tutorial

3. Startup settings: How to set the boot to boot from the U disk

2. The steps for Laomaotiao to install the system are as follows

1. After making the Laomaotiao USB flash drive, copy the system iso image directly to the GHO directory of the Laomaotiao USB flash drive;

< p>2. Insert the Laomaotiao U disk into the computer, restart and press shortcut keys such as F12, F11, or Esc, and choose to boot from the U disk. For computers that do not have these startup keys, refer to the "Startup Settings" tutorial above;

3. After booting from the U disk, enter the main menu of Laomaotiao, select 01 or 02 and press Enter to run the PE system;

4. In the PE system, if partitioning is not required, directly Skip to step 6. If you need a full disk partition, you need to back up all data on the hard disk, then double-click to open the DG partition tool, click Hard Disk - Quick Partition;

5. Set the number of partitions and disk size. It is generally recommended to use the system disk Above 50G, if it is a solid-state drive, check Align Partition to perform 4k alignment, and click OK to perform the partition operation;

6. Double-click Laomaochao PE One-click Installation to open the installation tool, and select the system iso path for the image path. Click the drop-down box to select the gho file;

7. Then click the restore partition and select the system installation location, usually the C drive, or select based on the volume label and disk size, and click OK;

8. A dialog box pops up, check Restart after completion and Boot Repair, and then click Yes;

9. In this interface, perform the system installation and deployment to the C drive. This process takes about 5 minutes; < /p>

10. After the operation is completed, the computer will automatically restart. At this time, pull out the Laomaotiao U disk. After startup, it will automatically perform the one-click installation of the system driver, system configuration and activation process;

11 , the reinstallation process requires multiple restarts until you boot into a new system desktop and the system is installed.

After following the above steps, we have completed the system installation process of Laomaotao. The installation process is not difficult. After setting up the U disk to boot, you can use Laomaotao to install the system.