Qinshan Nuclear Power Station is located in Haiyan County, Zhejiang Province.

The first phase of the project adopts China CNP300 PWR technology, with installed capacity of1× 300,000 kilowatts, design life of 30 years and comprehensive localization rate of over 70%. The first tank of nuclear island floor concrete (FCD) was poured in June 5438+0,996,5438+0,65,438+February. After more than ten years of management practice, Premier Zhou Enlai's goal of "mastering technology, accumulating experience, cultivating talents and laying a foundation for the development of nuclear power in China" has been achieved.

China CNP650 PWR technology is adopted in the second phase and expansion project, with an installed capacity of 2× 650 kW and a design life of 40 years. The comprehensive localization rate is about 55% in the second phase and 70% in the second phase. 1# and 2# units started in June and March, respectively, nearly 8 years later. The two units were put into commercial operation in April, 2002 and May, 2004 respectively, which made China realize a great leap from independently building a small prototype reactor nuclear power plant to independently building a large commercial nuclear power plant, laid a solid foundation for China to independently design and build a million kilowatt nuclear power plant, and will play an important role in promoting the development of nuclear power in China and further stimulating the national economy. The expansion project (3# and 4# units) was improved on the basis of design and technology and started on April 28, 2006. Unit 3 is scheduled to be completed and put into operation in February 20 10, and unit 4 will strive to put into operation by the end of 20 1 1.

Qinshan Phase III (heavy water reactor) nuclear power plant adopts Canada's mature CANDU 6 heavy water reactor technology, with an installed capacity of 2×728 MW, a design life of 40 years and a comprehensive localization rate of about 55%. The reference power plants are Units 3 and 4 of Yuecheng Nuclear Power Station in Korea. 1 unit was first connected to the grid in 2002 1 19, and put into commercial operation on12,31. Unit 2 was first connected to the grid on June 12, 2003 and put into commercial operation on July 24, 2003.

2. Guangdong Daya Bay Nuclear Power Station

Daya Bay Nuclear Power Station adopts French M3 10 PWR technology, with an installed capacity of 2× 984,000 kilowatts, a design life of 40 years and a comprehensive localization rate of less than 10%. The project officially started on August 7th 1987, and the capacity of two stand-alone machines on February 0th and May 6th 1994 was 988.

3. Ling 'ao Nuclear Power Station

Ling 'ao Nuclear Power Station is located in the southeast of Dapeng Peninsula on the west coast of Daya Bay, Guangdong Province.

China CPR 1000 PWR technology was adopted in the first phase of the project, with an installed capacity of 2× 990 kW, a design life of 40 years and a comprehensive localization rate of about 30%. Construction started in May 1997, was fully completed and put into commercial operation in October/2003, and was completed in July 2004.

China's improved CPR 1000 PWR technology is adopted in the second phase project, with an installed capacity of 2× 1 10,000 kW and a design life of 40 years. The comprehensive localization rates of 1 and 2 units are over 50% and 70% respectively. Construction started in February 2005, and two sets are planned to be built in 2065438+.

The third phase of the project adopts China's improved CPR 1000 PWR technology, with an installed capacity of 2× 1 10,000 kW and a design life of 40 years. Construction is expected to start on 20 1 1.

4. Tianwan Nuclear Power Station (CNNC)

Located in Tianwan, Lianyun District, Lianyungang City, Jiangsu Province, the plant area is planned to be 4 million kilowatts of nuclear power units, and there is room for building 2 to 4 more.

The first phase of the project adopts Russian AES-9 1 PWR technology, with an installed capacity of 2× 1.06 million kilowatts, a design life of 40 years and a comprehensive localization rate of about 70%. /kloc-0 officially started construction (FCD) on June 20th, 999, and the construction period of a single unit is 62 months. It was put into commercial operation in May 2007 and August 2007 respectively.

Units 3 and 4 of the second phase project have started construction, and each unit has a capacity of 654.38+0 million kilowatts.

Units 5 and 6 of the third phase project have started construction, and China No.2 Plus CPR 1000 nuclear power technology has been adopted.

Verb (abbreviation of verb) Hongyanhe nuclear power station

Liaoning Hongyanhe Nuclear Power Station is located in Donggang Town, wafangdian city, Dalian City, Liaoning Province, on the east bank of Liaodong Bay in Bohai Sea at the western end of wafangdian city. It is planned to build 6 units, using China's improved CPR 1000 PWR technology, with a single unit capacity of 1 10,000 kW, a design life of 40 years and a comprehensive localization rate of about 60%. 1 unit was officially started in August 2007, and was completed and put into commercial operation in 20 12. Currently under construction. ....

6. Ningde Nuclear Power Station

It is planned to build 6 units, using China's improved CPR 1000 PWR technology, with a single unit capacity of 1 10,000 kW, a design life of 40 years and a comprehensive localization rate of over 75%. 1# unit is FCD in February 2008, and 1 # unit and 2# unit are planned to be 2065438+.

Seven. Yangjiang nuclear power station

In 2004, the Yangjiang nuclear power project in Guangdong Province, which has been prepared for more than 10 years, is also expected to pass the national examination and approval by the end of the year. The first phase of China's largest nuclear power project plans to invest 8 billion US dollars, and plans to build 6 million kilowatt units, which was officially started in 2006. Currently under construction. ........

Eight, Sanmen nuclear power plant

In July, 2004, the first phase project of sanmen nuclear power plant, located in the south of Zhejiang, was approved by the State Council. This is the first self-designed nuclear power plant in China-Qinshan Nuclear Power Plant, which was approved in 1996.

The second nuclear power plant in Zhejiang province. Sanmen nuclear power plant covers a total area of 7.4 million cubic meters, and can install 6 1 million kilowatt nuclear power units respectively. Upon completion, the total installed capacity will reach120,000 kilowatts.

Above, it exceeds the total installed capacity of the Three Gorges Power Station. With a total investment of 25 billion yuan, the first phase of the project will first build two domestic most advanced 654.38+0 MW PWR technical units. Sanmen nuclear power plant will be at 20 10 at the earliest.

Play a role before and after.

Nine. Haiyang nuclear power station

The first phase of Haiyang Nuclear Power Station is located in the southeast of Haiyang City, Yantai, Shandong Province, with a total investment of 60 billion yuan, which started at the end of 2007. At present, the preparatory work for Haiyang nuclear power project has been fully completed, and it is planned that two units of 20 10 in the first phase of the project will be connected to the grid for power generation. At the same time, the supporting project of the project-pumped storage power station project, will also start construction at the same time as the first phase of the nuclear power plant project. After the completion of the "two power" project, it will provide 6 million kilowatts of electricity every year. It is understood that Haiyang Nuclear Power Station will be the largest nuclear power project in China after its completion.

Haiyang nuclear power plant project is a nuclear power project approved by the National Development and Reform Commission and controlled by China Power Investment Group (China Power Investment Corporation). China Power Investment Group accounts for 40%, China National Nuclear Corporation accounts for 20%, Guodian Group accounts for 20%, Shandong Lu Xin Holdings accounts for 65,438+00%, Huaneng Group accounts for 5%, and Yantai Power Development accounts for 5%. It is understood that due to the high technical and safety requirements of nuclear power, the construction of nuclear power plants was previously undertaken by enterprises with military background.

Haiyang Nuclear Power Station is located in the southeast seaside of Haiyang City, in Lengjiazhuang, Daxinjia Town, Haiyang City, adjacent to Dongjiazhuang. Located in Jiaodong Power Load Center, with superior geological conditions, it is one of the best nuclear power sites in China. The project will be implemented in three stages. Two 100 MW nuclear power units will be built in the first phase. The feasibility study report of the project shows that the planned capacity of Haiyang nuclear power plant is 6 million kilowatts, and there is room for expansion, with a total installed capacity of 8.7 million kilowatts. After all generators are put into production, the annual power generation is close to 90% of the Three Gorges Power Station. The first phase of the project will invest 25 billion yuan, and it is planned to build two million kilowatt nuclear power units.

Shandong Rushan Nuclear Power Project plans to build 6 million-class nuclear power units, and 2 million-class nuclear power units will be built in the first phase of the project. In 2006, the preparatory work for the preliminary project was started, and efforts were made to put it into production at the end of the Twelfth Five-Year Plan.

The Commission of Science, Technology and Industry for National Defense revealed at the National Defense Science, Technology and Industry Conference held on June 7, 2008 that in 2008, China will start construction of three nuclear power projects in Ningde, Fujian, Fuqing and Yangjiang, Guangdong.

In addition, there are three nuclear power plants in Taiwan Province Province, China; Contract under construction 1; There are also two planned buildings. Two nuclear power plants, Qingshan and Guo Sheng in Taiwan Province Province, have been put into operation, with installed capacities of 2×63.6 and 2× 985,000 kilowatts respectively.

Fangjiashan nuclear power station

Fangjiashan Nuclear Power Project is the expansion project of Qinshan Nuclear Power Phase I Project. The planned capacity of the project is two million kilowatt PWR nuclear power units, and the second generation of improved PWR technology is adopted, with the localization rate exceeding 80%. It is estimated that the two units will be put into commercial operation in 20 13 and 20 14 respectively. After the project is completed, Qinshan Nuclear Power Base will have 9 nuclear power units with a total capacity of 6.3 million kilowatts. The project is located in Haiyan, Zhejiang, with Hangzhou Bay in the south. After completion, it will undertake the East China regional power grid, and its location advantage is quite obvious.

Eleven Xianning nuclear power station

Tongshan County, Hubei Province, at the junction of Hubei and Jiangxi, has the second largest reservoir in Hubei Province-fushui reservoir. The reservoir on Fushui River was built in 1964, which has the functions of flood storage, power generation, irrigation, aquaculture, shipping, etc. The annual power generation is1.41.200 million kWh, the dam height is 45 meters, the dam crest width is 6.4 meters, and the dam crest length is 94 1 meter, which is 8. Such a beautiful place also hides China's first inland nuclear power project-Xianning Nuclear Power Station in Hubei. 165438+1October18th, a reporter from Chengdu Business Daily paid a field visit to this project under construction.

Entering the site of the nuclear power plant in Dageng Village, Dafan Town, Tongshan County, it is a 26-kilometer-long special large-scale transportation highway-nuclear power highway. The expressway has been built and a bridge across the lake is under construction. The nuclear power station is located on Lion Mountain, an island in the middle of the lake, which is connected by a bridge.

Xianning nuclear power project started construction in 2009. On May 15 this year, a package of contract framework agreements, such as conventional island and general contracting of auxiliary systems of nuclear power plant, was signed in Wuhan, and the opening ceremony of Xianning Branch and Xianning Project Department was held by China Guangdong Nuclear Power Group Engineering Co., Ltd.

According to the public information network of Tongshan county government, as of 1 1.4, the earth and stone works for site leveling in the main urban area have been completed 16 1 10,000 cubic meters, accounting for 76. 1% of the total. 1 and No.2 nuclear islands have reached the plant-level elevation, and the construction progress will be accelerated according to the goal of four units reaching the plant-level elevation by the end of this year. It is planned to be completed by the end of this year.

Xianning nuclear power project also marks that China has entered the third generation nuclear power development stage. It will adopt passive PWR nuclear power technology for the first time, which has attracted the attention of China nuclear power industry. This nuclear power technology is the only third-generation nuclear power technology finally designed and approved by the US Nuclear Regulatory Commission, and it is the safest and most advanced in the global nuclear power market.

The Xianning nuclear power project with a total investment of more than 60 billion yuan is owned by Hubei Nuclear Power Co., Ltd., a joint venture between China Guangdong Nuclear Power Group and hubei energy Group (60% and 40% respectively, with China Guangdong Nuclear Power Group accounting for the majority). When the company was established in June 2008, it was predicted that after two years of preparation and five and a half years of main project construction, Hubei would use nuclear power for the first time.