Party A: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ (hereinafter referred to as Party A)

Party B: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ (hereinafter referred to as Party B)

Based on the principles of equality, cooperation and mutual benefit, Party A and Party B have reached the following consensus on the matter that Party B entrusts Party A to make graduation commemorative products for Party B through friendly negotiation:

I. Contents of cooperation

Entrusted by Party B, Party A shall, in accordance with the Charging Standard for Graduation Commemorative Products in 20 13 Years, _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

Second, the operating rules

Make graduation souvenirs in strict accordance with the standardized process.

The basic sequence of the process is as follows: project signing, deposit payment, manuscript collection, product output confirmation, financial settlement and product delivery.

After signing the contract, the project will enter the specific operation stage, and both parties will strictly implement it in every step of the implementation process according to the overall planning scheme.

Three. Responsibilities and powers of both parties

1. During the cooperation between the two parties, Party B shall provide all kinds of materials required by Party A in time and be responsible for the authenticity, accuracy and completeness of the above materials. In case of any dispute caused by the information provided by Party B, Party B shall bear all relevant responsibilities.

2. Party B has the right to put forward opinions and suggestions on the modification of the draft design submitted by Party A in time, and Party A will make modifications and adjustments accordingly until Party B approves it.

3. If Party B proposes to revise it again after it is finalized, the relevant expenses arising therefrom shall be borne by Party B. ..

If the finished product is inconsistent with the manuscript confirmed by Party B due to Party A's work, Party A shall bear all relevant expenses and responsibilities.

4. Party A shall serve Party B dutifully, keep close contact with Party B and communicate with Party B frequently.

Party A shall take the initiative to ask Party B for relevant information required for various tasks in advance, and carry out design, output and other business according to the manuscript confirmed by Party B. ..

Fourth, the charging regulations

1. down payment: In order to ensure the standardization of contract execution, Party A will collect a down payment of _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

If Party B unilaterally suspends the execution of this agreement in the middle of the cooperation period, the deposit will be converted into liquidated damages paid by Party B to Party A. ..

2. Total expenses: On the day when Party A delivers Party B's products as agreed, Party B shall pay all the service and production expenses to Party A, totaling _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

5. Appendix to this Agreement: 20 13 graduation souvenir fee.

This agreement is made in duplicate, one for each party.

It will take effect as of the date of signature by both parties.

Party A: Party B:

Representative: representative:

Tel: Tel:

Date of signature: year month day.

?

Printing contract 2

Party A: _ _ _ _ _ _ _

Party B: _ _ _ _ _ _

Through friendly negotiation, Party A and Party B have reached the following agreement on Party A entrusting Party B to produce Party A _ _ _ _ _ _ _:

I. Project Overview: _ _ _ _ _ _

Second, the project details:

Project name:

1, size: _ _ _ _ _ _

2. Design and production: _ _ _ _ _ _ _

3. Paper: _ _ _ _ _ _

4. Pages: _ _ _ _ _ _

5. Color code: _ _ _ _ _ _

6. Post-processing: _ _ _ _ _ _

7. Quantity: _ _ _ _ _ _

Unit price: _ _ _ _ _ _

Total price: _ _ _ _ _ _

Three. Payment terms:

Pay 30% of the total price from the date of production, 20% after the sample is confirmed, and the remaining 50% on the day of delivery.

Fourth, the mode of delivery.

Printing processing: delivery within _ _ _ _ _ working days after confirming the sample.

Place of delivery: Party A's company, the freight shall be borne by Party B, and the product risk shall be transferred from the date of delivery.

Five, printing quality standards

1. Party B's pre-production shall be completed on time and with good quality according to the requirements of providing samples, and the quality of printed matter shall be subject to sample signing and acceptance; Party A is responsible for checking and confirming relevant contents in time, and for acceptance.

2. Party A has the right to ask Party B to provide no more than four samples for the manuscript designed and produced by Party A. ..

When Party B provides the fourth confirmation draft, Party A shall complete all the confirmation and modification work.

If the manuscript still needs to be revised after the fourth confirmation due to Party A's reasons, Party A agrees to pay an additional fee of no more than _ _ _ _ _ _ yuan per page depending on the revised content.

3. If the film provided to Party A is inconsistent with the sample, Party B does not guarantee that the printing color is absolutely consistent with the sample provided, but the normal printing effect of the film shall prevail.

4. The range of positive and negative chromatic aberration of color printed matter shall not exceed 10% of the sample, and the allowable error of overprinter shall be less than 0.2mm. Other items to be inspected shall be accepted according to the national press and publication industry standard "Quality Standard for Lithographic General Printed Matter".

5. If Party A has any objection to the printing quality, it must raise it within three working days after delivery. Under any circumstances, Party B shall not be jointly and severally liable for publishing and advertising other than printing.

The intransitive verb Party B's responsibility.

1. Party B shall properly keep the originals (or electronic documents), proofs, printed plates, negatives, semi-finished products, finished products and printed samples of printed matter, and shall not damage them.

2. Party B must print in strict accordance with the printing quantity specified in this contract, and shall not print without authorization.

3. After completing the entrusted printing business, Party B shall carefully count the number of printed materials, register the ledger, and return all printed materials, manuscripts (or electronic documents), negatives, plates, proofs, etc. Give it to Party A according to the provisions of this contract, and shall not keep it without authorization.

4. When Party B promises, it shall verify the relevant certificates of the entrusting party, and shall not print printed materials with false contents and pictures.

Seven. Intellectual property and confidentiality

1. Party B shall keep Party A's production and distribution methods and plans strictly confidential.

2. Party B's designers shall consciously protect all electronic documents provided by Party A for typesetting and printing, and shall not provide them to any third party for any purpose without authorization.

3. The graphic design made by Party B for Party A's magazine belongs to Party A. ..

4. Party B shall properly keep all electronic design manuscripts and films of the magazine, and Party A shall provide them when necessary; After the termination of the contract, if both parties do not renew the contract, Party B shall hand over all electronic design drafts and films to Party A. ..

Eight, other terms of the contract

The delivery quantity is allowed to be short shipment plus or minus 5%.

In case of overload, Party A has the right to choose whether to receive the overloaded goods at the contract unit price.

If Party A does not accept it, Party B shall not give it to others or sell it at any price without authorization, except as a reference sample for other customers' printing business.

If the insufficient part is less than 5%, Party B shall deduct the corresponding amount from the total contract price according to the contract unit price, but shall not make up the amount separately.

If the difference exceeds 5%, Party A has the right to ask Party B to make up the difference.

If one party fails to perform the contract due to force majeure factors such as policy changes and government administrative actions, the contract will be terminated and both parties will not be liable for breach of contract.

Nine. responsibility for breach of contract

1. Party A and Party B shall strictly abide by the relevant provisions of this contract. Matters not covered in this contract shall be settled through friendly negotiation.

2. If either party breaches this contract and negotiation fails, the dispute shall be settled by the people's court where the defendant is located.

3. If the contract cannot be performed due to force majeure, both parties shall postpone the performance through friendly negotiation. If negotiation fails or it is really impossible to continue, both parties shall not be liable for breach of contract.

X this contract is made in duplicate, with each party holding one copy, all of which are equally authentic.

Party A (seal): _ _ _ _ Party B (seal): _ _ _ _ _ _

Authorized representative (signature): _ _ _ _ Authorized representative (signature): _ _ _ _ _

Address: _ _ _ _ _ _ Address: _ _ _ _ _ _

Postal code: _ _ _ _ _ _ Postal code: _ _ _ _ _ _ _ _

Tel: _ _ _ _ _ Tel: _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Signing place: _ _ _ _ _ Signing place: _ _ _ _ _ _