Instructions for use:

Instructions before use: For the first time, please take out all accessories from the pan, read the instructions carefully, and pay special attention to the usage and precautions, so as not to cause financial losses or personal injury to you.

Cooking preparation:

1. Open the lid correctly: first, hold the lid tightly by hand, rotate the lid clockwise to the limit edge of opening the lid, and then lift the lid upward.

2. Check whether the pot cover parts are properly installed: check whether the float valve and exhaust valve are blocked, and confirm whether the sealing ring and anti-blocking cover parts are properly installed.

3. Take out the inner pot and put food and water into the inner pot: the total amount of food and water shall not exceed the Max line of the height of the inner pot.

4. put the inner pot into the electric pressure cooker: before putting it in, be sure to remove impurities and water attached to the outer side of the inner pot; After putting it in, gently rotate the inner pot left and right to ensure good contact between the inner pot and the heating plate.

5. Close the lid in place: before closing the lid, check whether the sealing ring has been put into the steel ring inside the lid. Hold the handle of the lid, lay it flat to the limit edge of opening the lid, then rotate the lid counterclockwise to the locking position, and hear the locking sound of "click".

6. Place the exhaust valve: turn it to the sealing area and check whether the float valve falls (it fell before heating).

General functions:

1. Make preparations.

2. Turn on the power supply: the digital tube flashes "-"red horizontal line, indicating that the electric pressure cooker has entered the state of preparation;

3. Select the required function file: press a function key and the indicator light of the corresponding function file will light up (red); The porridge function and cake function are only applicable to products with this function file; The cooking time of different function files is different, and the larger the food quantity, the longer the cooking time.

4. Press a function key, and the electric pressure cooker will start to execute the selected corresponding function program after 1 seconds: the appointment time and function file can be reselected within 1 seconds, and the electric pressure cooker will start to work after 1 seconds of final confirmation. The red horizontal line on the display screen lights up, indicating that the electric pressure cooker has entered the state. Press the "Insulation/Cancel" key during work to cancel the existing working state and return to the standby state.

5. After cooking, it will automatically enter the heat preservation state: after cooking, the corresponding function indicator lights will go out, the heat preservation lights will light up (yellow), the display screen will display ".", and at the same time, a prompt sound will be given (1 DiDi sounds), so that the electric pressure cooker will enter the heat preservation state. Press the "heat preservation/cancel" key in standby mode, the heat preservation light will light up (yellow), and a prompt sound (DiDi sound once) will be given at the same time, indicating that the electric pressure cooker has entered the heat preservation state.

note: there are many cooking functions. please refer to the instructions in the package.

I hope I can help you.