Many families have bought photo walls from the internet and prepared many warm and lovely photos, but the installation method of photo walls is half-baked. Today, we will teach you how to install a photo wall through text notes and pictures. Even if you've never installed a photo wall, that's fine. Tools/raw materials I-nails Level drawings seamless wall nailing steps/methods 1 We need to put the photos in the photo frame first. Here are the steps to put the photos, and the photos must be put away. Otherwise, after installing the photo wall, you will find that the photos are not in the right position in the frame and have to be reinstalled. Please don't worry. Before installing the photo, tear off the plastic protective film on the photo frame glass. Generally, there are protective films on both sides of glass, so remember to tear them off. Then put the glass in the photo frame, then put the glass in the photo frame, put the decorative cardboard on it, then put the photos we have prepared in the photo frame, and put the backboard on the photo frame of this photo wall. We have prepared the photos and installed them, and the next step is to nail the photo frame to the wall. Don't go away. Continue to install the photo frame. Install the photo frame. Let's fix the drawing with colored I-nails and level it with a level. Be sure to look at it, or the photo frame on the photo wall will be crooked. Just look at the center of the bubble in the level meter, which means it is horizontal. Hammer the traceless wall nail into the wall. One wall nail per photo frame is enough. After hammering the wall nail in, hang the hook on the back of the photo frame on the newly inlaid wall nail, and then check whether the photo frame is installed on the horizontal line with a level meter. If the photo frame is installed on a horizontal line, you're done. Other photo frames can also be copied in this way. How to install the photo wall Illustration Many families have bought the photo wall from the Internet and prepared a lot of warm and lovely photos, but the installation method of the photo wall is. Today, we will teach you how to install a photo wall through text notes and pictures. Even if you've never installed a photo wall, that's fine. 1. We need to put the photos in the frame first. Here are the steps to put the photos. The photos must be put away. Otherwise, after installing the photo wall, you will find that the photos are not in the right position in the frame and have to be reinstalled. Please don't worry. Before installing the photo, tear off the plastic protective film on the photo frame glass. Generally, there are protective films on both sides of glass, so remember to tear them off. Then put the glass in the photo frame and put the decorative cardboard on it, and then we should pay attention to several points when we are going to buy the photo wall. Secondly, the thickness of the photo frame is about 1.5-2 cm, and the groove behind the photo frame is about 0.5-0.8 cm, so there will be problems. After the glass behind the photo frame is 1.5MM thick, the cardboard is 1 mm thick, and the back plate is 2MM thick, install the S-hook. When hanging on the invisible hook, there will be a gap between the frame and the wall, that is, the upper part of the frame will have a certain angle with the wall, which looks very uncoordinated and feels like hanging there, and the visual sense will decline. The real photo frame used to make the photo wall has a border thickness of 2 cm and a groove depth of 1.5 cm on the back, so that after the glass, cardboard and back plate are installed, they are hung up with invisible hooks to form a zero-degree angle seamlessly with the front. Finally, the surface glass of the photo frame. There are two kinds of glass commonly used in general photo frames, one is high-definition timely glass, which is our common fragile glass, and the other is plexiglass, which is made of polymer plastic and is very thin. This kind of glass is not fragile, but it is very soft.