The responsibility book is a document that should be done in one's own post, and should bear the bad consequences when one does not do one's job well. In fact, it is to realize who is mainly responsible in case of an accident. The following is the management responsibility letter I brought you. Welcome to read the reference. Let's have a look!
Management Responsibility Letter (Selected Text 1)
School canteen is an important department of school food safety work. Strengthening food hygiene and safety in canteens is the basic strategy for schools to implement "safety first". In order to enhance the safety awareness of the canteen, resolutely put an end to accidents and implement the responsibility system for safety work, this responsibility book is specially signed according to the responsibility requirements of the person in charge of the canteen.
1, pay attention to the physical condition of the canteen staff, have a physical examination once a year, so that everyone can work with certificates, ensure good health, and insist on morning examination. Once the canteen staff is found to be abnormal, they should be urged to leave their posts immediately.
2, vigorously promote the "Food Hygiene Law" and the relevant knowledge of preventing food poisoning, and enhance the health legal concept of canteen staff. Supervise chefs to learn food knowledge and improve health awareness.
3, supervise and urge the operation in strict accordance with the functional partition, to prevent cross-contamination.
4, comprehensive supervision canteen hygiene, pays special attention to the jurisdiction of the canteen indoor and outdoor environmental sanitation, do not have dust, pollution, oil pollution, ditch to clean, smooth, no smell.
5, strengthen food supervision, regularly check the food situation, it is strictly prohibited to moldy food.
6, supervise the disinfection of tableware, tableware must be disinfected after each meal. Pool, basin and other appliances should be cleaned in time.
7, often urge all cooking personnel to develop good health habits and operating system, wear work clothes, work caps, don't wear jewelry at work. It is required to maintain good personal hygiene every day, take a bath frequently, cut your nails frequently, wash your hair and get a haircut frequently, and change clothes frequently.
8, urge the cooking personnel to use the processing machinery correctly, pay attention to the safety of electricity, and turn it off immediately after the end of electricity consumption. The doors and windows of the canteen should be closed in time. Once people leave, close the doors and windows behind them.
9. According to the food hygiene system, urge the cooks to do a good job in food hygiene: separate the raw and cooked knives from the chopping board, separate the meat washing and vegetable washing pools, and clean the stoves with one scraping, two washing, three disinfection, four washing and five cleaning.
10, according to different seasons, especially in summer and autumn when mosquitoes, flies and cockroaches are killed, adhere to comprehensive management to achieve no mosquitoes, flies and cockroaches.
1 1. Regularly check the designated procurement and certification system of food raw materials to ensure the safety and reliability of sources.
12. supervise the establishment and improvement of various files for monitoring nutritious meals and nutrition plans, including daily recipes, sample retention records, disinfection records, leftover meal disposal records, etc.
13, always pay attention to the dining situation in the canteen, and report as soon as there are special circumstances.
14. This responsibility book is made in duplicate, one for the canteen manager and one for the school, which shall take effect from the date of signature and be valid for one year.
School (seal)
Canteen Manager (signature)
September 2000 1 day.
Management Responsibility Letter (Excerpt 2)
Responsibility book for warehouse safety management
In order to do a good job in warehouse safety management, implement the policy of "safety first, prevention first"; Gradually implement fire safety work. Avoid fire accidents, ensure personal and property safety, and find and deal with unsafe factors in time. According to the principle of "whoever is in charge is responsible", the first person in charge of each warehouse is the person in charge of fire safety in the warehouse, who is responsible for the overall safety management of the warehouse.
Therefore, _ _ _ _ _ _ _ (Mr. and Ms.) is the person in charge of safety management of _ _ _ _ _ _.
Responsibilities of the person in charge of safety
1. In the process of organizing and managing the normal operation of the warehouse, the company's safety production guidelines, policies, decrees and warehouse management rules and regulations should be implemented at the same time. Effectively put safety management on the agenda, and achieve five simultaneities, that is, plan, arrange, inspect, summarize and evaluate safety work while planning, arranging, inspecting, summarizing and evaluating production work.
2, formulate the annual work objectives and indicators of warehouse safety management, participate in the formulation and implementation of warehouse safety management rules and regulations, safety operation procedures and safety precautions plan; Supervise and inspect the implementation of various management systems and do a good job in civilized production.
3. Organize and be responsible for training and educating warehouse employees on labor discipline, rules and regulations, safe operation and use of labor insurance articles, so as to improve the safety awareness and accident handling ability of warehouse managers.
4, is responsible for organizing the warehouse safety inspection, eliminate hidden dangers, to ensure that the fire safety facilities in good condition,
Protective equipment, etc. Are in a normal state.
5. Implement and formulate the fire prevention work and emergency plan of this warehouse, implement various safety rectification measures, and strictly control the occurrence of fire accidents.
6. Timely report warehouse safety accidents, organize rescue and protect the site, and participate in accident investigation and handling.
7. Establish and improve the warehouse safety management network, implement the warehouse safety management and duty inspection system, implement the post fire prevention responsibility system, select qualified management personnel, and organize all warehouse personnel to carry out safety training activities to ensure the qualified rate of training 100%.
8. Obey the leadership of the company's management department and the person in charge of this department, feedback information in time, and put forward reasonable opinions and suggestions.
9. Actively implement the company's relevant regulations on warehouse management (see annex for these regulations).
1 0. In case of violation of corresponding regulations and responsibilities, the department manager will be fined 600 yuan every time, the deputy department manager will be fined 400 yuan every time, and the corresponding employees who violate the rules will be fined 200 yuan every time.
X years _ _ _ _ _
Management Responsibility Letter (Excerpt 3)
Construction Engineering Co., Ltd. (hereinafter referred to as Party A)
Project Department of Construction Engineering Co., Ltd. (hereinafter referred to as Party B)
Quality is the life of an enterprise and also the life of a project. The good project quality management of the project department not only maintains the reputation of the enterprise, but also improves the reputation of the project department, which is closely related to the economic benefits of the project department. Therefore, the project department should adhere to the policy of "quality first, prevention first" and effectively implement the project quality management throughout the construction process.
I. Party A's quality management responsibilities.
1, and urge the project to implement relevant national technical specifications, standards and regulations.
2, review the project construction organization design
3. New technologies, new processes and new materials should be popularized and applied in engineering construction.
4. Coordinate the working relationship among design, supervision, supervision, owner and project department.
5. Inspect the engineering construction and handle the problems in time when found.
6. Participate in the inspection and acceptance of concealed works.
7. Supervise the filling, drawing, collecting, sorting, filing and handing over of quality inspection data of the project department.
8, presided over the analysis and handling of engineering quality accidents.
Second, Party B's quality management responsibility.
1. The project manager is the first person in charge of project quality management, and a project quality management team is set up to be responsible for the technical and quality management of the project.
2, responsible for writing the project construction organization design or construction scheme.
3. Seriously implement the national construction norms, procedures, standards, laws and regulations and the management system of Party A. ..
4, the implementation of new technologies, new processes, new materials in the engineering application.
5. Track the project quality at any time and solve the problems in time when found.
6. Be responsible for filling, drawing, collecting, sorting out the completion data of the project quality inspection, and filing and handing it over in time after the project completion acceptance.
7. Handle the working relationship between the project and design, supervision, supervision and owner, so as to make the project construction go smoothly.
8. Accept the supervision and inspection of the company's chief engineer, technology and quality inspection departments, and earnestly implement the quality treatment opinions put forward by the company in a timely manner.
9. In case of major or minor quality accidents in the project department, Party B shall bear all kinds of materials, labor, appraisal and other related expenses.
Three. Reward and punishment
1. Before the project starts, the project department shall pay the project quality deposit RMB to Party A. ..
2. In case of any quality accident, Party B shall be responsible for all materials and labor costs.
3. After the completion of the project, there is no major or minor quality accident, and Party A shall return the project quality deposit paid by Party B in full. ..
4. If all expenses of Party B's quality accident exceed RMB, Party A will not refund the project quality deposit paid by Party B. ..
5. If all expenses incurred by Party B due to quality accidents are less than RMB, Party A will return% of the project quality deposit paid by Party B. ..
6. For the quality deposit returned by Party A to Party B, the project department will reward those who have contributed to the quality management.
7. In case of quality accident in the project, the project department will investigate the responsibility of relevant personnel and impose economic penalties. If the circumstances are serious, it shall be investigated and dealt with by the judicial department.
Four. Supplementary terms:
5. This Responsibility Letter is made in quadruplicate, each party holds two copies, which will take effect after being signed by both parties. After the project is completed, it will naturally become invalid after the warranty period expires.
Party A: Head of Construction Engineering Co., Ltd.: Party B: Head of Project Department of Construction Engineering Co., Ltd.:
Year, month and year, two o two.
Management Responsibility Letter (Excerpt 4)
In order to strengthen the management of staff dormitory, maintain a safe, clean, hygienic and civilized living environment, and ensure the normal use of dormitory facilities, employees consciously abide by the dormitory safety management system, and the responsibility book for staff dormitory safety management is formulated as follows:
A, safety automatic control management:
1. Staff accommodation should be managed and supervised by the housekeeper, and it is forbidden to change beds without permission.
2. The use of TV and radio shall not interfere with the rest of others; Don't quarrel, make a loud noise or interfere with others' rest indoors and outdoors.
3. Without approval, it is forbidden for the dismissed personnel to enter the staff dormitory; Foreigners are not allowed to stay in the dormitory or receive the opposite sex in the dormitory without authorization.
4. valuables should be kept by themselves, and those who leave them indoors in violation of regulations will lose them at their own risk.
5. Don't post calligraphy and painting or nail items on walls, cabinets, doors and windows at will. 6. Waste, rubbish, etc. Should be dumped in the designated place.
7. Employees take turns cleaning the room; Close the door after entering and leaving the room, and be careful of thieves. 8. Accommodation personnel should save water and electricity, and there are no ever-burning lamps and running water to turn off the lights. If the facilities are naturally damaged, they should be repaired in time.
9. Do not eat, drink, gamble, play mahjong or engage in other unhealthy activities in the dormitory.
10. Accommodation personnel are on duty in turn, responsible for the cleaning of public areas and the safety inspection of water, electricity, doors and windows. Report the problem in time and take immediate measures.
1 1. Accommodation personnel should go to the public security household registration management department to apply for a temporary residence permit in time. 12. Reasonable use and maintenance of dormitory facilities shall not be damaged. If losses are caused by personal reasons, compensation shall be made at the original price.
Second, the fire safety management:
1. Accommodation personnel should strictly implement "Who is in charge and who is responsible; Who checks, who is responsible for the fire safety responsibility, to achieve the overall prevention and control of crowded places; Employees should consciously abide by various fire safety systems.
2. It is forbidden to cook, cook or pull wires or connect electrical appliances without permission indoors.
3. Smoking is strictly prohibited in the dormitory; Flammable, explosive and prohibited items shall not be stored indoors.
4. Employees are not allowed to pull wires and sockets without permission.
5. Electric stoves, electric kettles, flammable appliances and AC appliances are not allowed in the dormitory.
6. It is forbidden to set off fireworks and firecrackers in the staff dormitory. The above is the best.
Person in charge:
Date: _ _ _ _ _ _
Management responsibility book (selected five)
Party A:
Party B:
Party A will contract _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
1. Party B shall do a good job in the public security management of the decoration personnel during the decoration period. During the renovation period, there shall be no fights, fights or other events that have a negative impact on Party A. ..
2. During the construction period, the construction personnel who live in the construction site should pay strict attention to their own image, and must not make noise or do anything that harms the image of Party A and violates the regulations on public security management.
3. Party B shall set up safety warning signs on the construction site. Various safety measures should be taken for overhead construction.
4. Smoking is strictly prohibited in the construction site. During the construction period, the fire prevention work on the construction site should be strengthened.
5. Due to the need of construction, Party B's connection of temporary wires or use of electric heating tools must conform to the installation specifications, and it is strictly prohibited to connect without permission.
6. Party B must check the electricity consumption of construction every day and turn off the power supply after the construction every day.
7. Party B shall strictly manage the construction site, all decoration materials shall be packed neatly, and the decoration garbage shall be removed in time.
8. Party B shall accept the supervision and inspection of Party A's management personnel at any time, and immediately rectify the hidden dangers.
9. Party B's construction personnel should pay attention to construction safety during construction, and illegal construction is strictly prohibited. Scaffolds and construction tools used in construction should be strictly inspected to prevent safety accidents. Party B shall be responsible for all safety accidents during the construction.
10, this responsibility book is made in duplicate, with each party holding one copy. It will take effect as of the date of signature and seal.
Signature (Seal) of the person in charge of Party A: Date:
Signature of project leader of Party A: Phone number of project leader of Party A:
Signature (Seal) of the person in charge of Party B: Date:
Signature of project leader of Party B: Phone number of project leader of Party B:
Management Responsibility Letter (Excerpt 6)
Equipment is an important material and technical basis for enterprises to carry out production activities, and equipment management is an important material guarantee to enhance the comprehensive competitiveness of enterprises. Equipment management plays a very important role in production activities, and strengthening equipment management is of great significance to enterprises.
Equipment maintenance is the basis of management, use and maintenance, and it is also one of the main responsible persons of operators. This is an important means to keep the equipment in good condition, and it is also an active preventive work. Equipment maintenance is a hard indicator of equipment operation: "The machine must be scrubbed frequently. What we're talking about here is extra labor. Without this extra labor, the machine will become unusable. " During the use of equipment, due to the material movement and chemical action of the equipment, the technical state will inevitably change and inevitable anomalies, as well as the loss caused by human factors, such as looseness, dry friction and corrosion. This is a hidden danger of the equipment. If not handled in time, it will lead to premature wear and tear of equipment and even serious accidents. Do a good job in equipment maintenance. Timely handling all kinds of problems that appear at any time and improving the running status of equipment can prevent problems before they happen and avoid unnecessary losses. Practice has proved that the service life of equipment largely depends on the degree of maintenance.
In order to strengthen the company's equipment management, each workshop needs to appoint an equipment technician to be responsible for the management of workshop equipment. Equipment technicians should perform the following duties in equipment management while doing their own jobs:
Main responsibilities of workshop equipment technician:
First of all, establish equipment management files and hang corresponding equipment at the scene.
The contents of the equipment management file include:
(1) sorting out the equipment list (that is, listing the specific accessory name, accessory specification/model, included quantity, spare inventory, service life, etc.). ).
(2) Keep records of equipment maintenance, train maintenance personnel how to keep records at the same time, and supervise maintenance personnel to keep records.
(3) Make a record table of parts replacement that can be traced to the specific location, and at the same time train the maintenance personnel how to record it, and supervise the maintenance personnel to make records.
Second, make the equipment maintenance plan and publish it on the management billboard.
① The equipment maintenance plan shall include: equipment maintenance requirements and maintenance cycle, and the person in charge of maintenance shall make an independent equipment checklist according to the equipment maintenance requirements.
Now, the equipment that needs to set the checklist has been listed in detail:
The press workshop needs to make maintenance records, regular maintenance plans and spot checks for the equipment of "press, entrance platform and glaze conveying line"; The kiln workshop needs to make maintenance records, regular maintenance plans and equipment spot checks of "fans, entrance and exit platforms, brick unloaders, drives, desulfurization towers and export conveyor lines";
Glaze workshop needs to make maintenance records, regular maintenance plans and spot checks of equipment for "flower machine, bricklaying machine, glaze platform and glaze conveying line";
The edging workshop needs to do a good job in the maintenance records, regular maintenance plans and equipment inspection of "edging machine, brick machine and conveying line";
The grading workshop needs to do "automatic baler, automatic color sorter, conveying line, maintenance record, regular maintenance plan and equipment spot inspection"; The polishing workshop needs to make maintenance records, regular maintenance plans and spot checks of the equipment of "edger, polisher, water supply pump, ultra-clean brightness and conveying line"; The raw material workshop needs to make maintenance records, regular maintenance plans and spot checks of "feeders, ball mills, plunger pumps, mixers, crushers, conveyor lines, spray towers, coal water slurry furnaces and filter presses";
The gas-making workshop needs to keep maintenance records, regular maintenance plans and spot checks of "feeders, coal belts, crushers, hydraulic stations, blowers, gas generators, pressurizers, phenol pumps, circulating pumps and softening pumps".
The maintenance records, regular maintenance plans and equipment spot checks of "mixer, feed conveyor belt, exhaust fan, ball mill, mixer, grinder and filter press" should be made in the ball glaze frit workshop.
(The specific equipment to be inspected will be determined according to the equipment operation! )
(2) According to the equipment maintenance plan, formulate the corresponding inspection and assessment system.
Third, do a good job in the management of workshop spare parts.
(1) Set up a special storage area for spare parts;
(2) Establish a spare parts list, indicating the quantity and storage location of spare parts;
③ Plan, place and mark spare parts;
④ Do a good job in spare parts inventory management. According to the three standards of "fixed point, positioning and quantification", the warehouse should be reasonable, convenient to enter and exit, and consistent with the accounts.
Fourth, do a good job in the follow-up management of equipment maintenance
1, according to the planning of equipment files, improve the identification of workshop equipment, so as to track the problem at a fixed point;
2. Train employees to understand the equipment, understand the division of responsibilities and maintenance requirements of the equipment, and try to let employees check and modify the equipment;
3. Organize departmental equipment inspection on a regular basis (twice a month), and divide the inspection results into regions according to the maintenance situation. After each inspection, submit the rectification of the last inspection and the problems of this inspection to the Equipment Department for filing.
4. Organize and analyze the workshop equipment accident in time, trace the responsibility, deal with it seriously and take preventive measures.
5. Carry out the safety operation procedures and maintenance rules, so that the equipment is always kept clean, clean, lubricated and safe, and in good running condition.
6, for illegal operation and poor maintenance caused by equipment damage, according to the seriousness of criticism, education and punishment.
7, combined with the equipment maintenance system, according to the inspection unqualified and not rectification problems, every time according to the 5-20 yuan to punish, if the circumstances are serious.
30-50 yuan will be deducted for severe punishment, and 200-20 _ _ yuan will be deducted for serious accidents.
Attachment: Please do your job! The Equipment Department has formulated the equipment management assessment plan for the above responsibilities!
This equipment management responsibility book is made in duplicate, one for the workshop and one for the equipment department.
Preparation department: signature (seal) of the person in charge of the workshop of the Equipment Department:
Prepared by: Jiao Jiao Time:
Compilation date: 20__-5- 1 signature (seal) of workshop equipment technician:
Equipment Department Audit: Time: