There is often a strong emotional bond between human beings and dogs, and dogs have become human pets or non-utilitarian companions.

Tools/Raw Materials Square paper with a black pen Step/Method Put one side of the paper up. Fold the paper in half diagonally and unfold it.

Fold the three corners of the paper to the center point respectively. Fold the paper in half.

Fold the sharp corner toward the left along the line formed by the midpoint of the upper side of the first small square and the midpoint of the lower side of the second small square. Expand.

The connection line of the above step is a valley mark, and the left half is spread. Flatten the erected part.

Fold up a part of the lower corner of the figure formed in the previous step, and then fold down a smaller part of the upper part to make the puppy's nose. Fold a small part of the two corners of the figure formed in the fourth step to the middle to make the puppy's ears.

Fold the two right angles in the lower right corner inward respectively.

How to origami a puppy

First, you need a square piece of paper.

Fold the diagonal in half. After opening, fold the other pair of diagonal corners in half.

Fold the three corners to the position of the center point. Turn it over.

Fold the left edge to the middle position, but the back corner cannot be folded. The right side is also folded to the middle position. Similarly, the back corner cannot be folded.

Fold down the upper corner of the origami model. Fold both corners down.

Open the corner folded in the last step, pull out the inner part and fold it down. The right corner is also open, and the inner part is pulled open and folded down.

Fold the upper edge to the lower edge, that is, fold the upper part in half. Like this, turn the back part to the top.

Turn to the back Fold the upper left side in half.

Open the part folded in the previous step, and fold it on the right. Here, the left and right sides are folded according to the creases of the upper two parts, the middle overlapping part is folded in half to the vertical position, and the vertical part is folded to the right.

Fold the right half from the back to the left. Fold the right part up.

Open the crease folded in the previous step. Fold the upper left part to the right.

Fold the crease made according to 2 1 step, so that the narrow part on the right side is vertical. Then fold the right part in half to the left.

After opening the long and narrow part, fold the horizontal crease to the vertical position as shown in the figure, and the back is also folded. After folding, it will look like the figure. The triangle on the left in the picture should be made into a tail, and this part should be folded inward to a certain extent, and the degree of folding can be determined by looking at the final finished picture.

The outer triangle also needs to be folded continuously. It's more like a tail.

At the other end, turn the small sharp corner up a little, and then fold the back part continuously, and the head of the origami puppy has come out. Just like this, blacken the triangle folded in the last step, stick it on your eyes, and then adjust the shape of your head.

Please refer to zhidiy/zheshirumen/2125/for specific operation steps and explanation of corresponding pictures.

How to fold the simplest puppy?

How to fold a puppy:

1, put one edge of the paper opposite to yourself, and fold it in half along the horizontal and vertical midline before unfolding.

2. Fold the left and right corners of the paper to the midpoint respectively.

3. Fold the folded part from the middle to both sides.

4. Fold the corner below the middle of the folded part outward in half, and then unfold it.

5. Fold the corner of the top paper to the middle to make it fall on the crease point, and fold it symmetrically.

6. Fold the bottom of the left and right parts up and into the middle of the two layers.

7. Turn the paper over and fold it in half to the vertical center line on the left and right respectively.

8. Fold up the two small corners exposed below after folding, so that the lower edges are flush.

9. Fold the left and right corners of the paper up to the middle respectively, and hide the corners between the two layers.

10, the top small triangle shape is folded back, and then the left half of the paper is folded back to the right.

1 1, the lower left corner is folded up, and then the front and rear layers are folded up from the outside along the crease.

12. Draw eyes and nose on the puppy, and a cute puppy will be folded.

Teach you how to fold a puppy.

There is often a strong emotional bond between human beings and dogs, and dogs have become human pets or non-utilitarian companions. Tools/Raw Materials Square paper with a black pen Step/Method Put one side of the paper up. Fold the paper in half diagonally and unfold it.

Fold the three corners of the paper to the center point respectively.

Fold the paper in half. Fold the sharp corner toward the left along the line formed by the midpoint of the upper side of the first small square and the midpoint of the lower side of the second small square. Expand.

The connection line of the above step is a valley mark, and the left half is spread. Flatten the erected part.

Fold up a part of the lower corner of the figure formed in the previous step, and then fold down a smaller part of the upper part to make the puppy's nose.

Fold a small part of the two corners of the figure formed in the fourth step to the middle to make the puppy's ears.

Fold the two right angles in the lower right corner inward respectively.

Illustration of dog origami head and limbs

Handmade origami, puppy folding method, simple origami for children, the steps of origami are clear, you should also try it. Take your own baby and use your hands and brains. First, show the finished product of children's hand-made origami puppy folding method. Step 1. Prepare a square piece of paper. Hehe, my paper has been folded, which is a bit ugly. Children's hand-made origami puppy folding method, step 2. As shown in the diagram, fold it in half. Step 3. Fold out the dog's ears. Fold the puppy's mouth by children's hand. Step 4. Fold the puppy's mouth by children's hand. Step 5. Click on the puppy's eyes and nose to succeed. Simple. This is the simplest hand-folded paper.

How to fold a dog with paper

How to Fold a Puppy with Paper Simple animal origami is always loved by friends who love animals. The simple origami animal shared with you here is a puppy. As long as you make it in a few simple steps, you can easily get a cute and realistic origami puppy. If you like this origami puppy, let's make it! 1. First, you need a square piece of paper.

2. Fold the diagonal in half. 3. After opening, fold the other pair of corners in half.

4. Fold the three corners to the position of the center point. Step 5 turn it over.

6. Fold the left edge to the middle position, but the back corner cannot be folded. 7. The right side is also folded to the middle position. Similarly, the back corner cannot be folded.

8. Fold down the corners on the origami model. 9. Fold down both corners.

10. Spread the corner folded in the previous step. 1 1. Pull out the inside part and fold it down.

12. The right corner is also opened, and the inner part is pulled open and folded down. 13. Fold the upper edge to the position of the lower edge, that is, fold the upper part in half.

14. Like this, turn the back part to the top. 15. Turn to the back.

16. Fold the upper left side in half. 17. Open the part folded in the previous step, and fold it on the right.

18. Here, both the left and right sides are folded according to the creases of the upper two parts, and the overlapping part in the middle is folded in half to the vertical position. 19. Fold the vertical part to the right.

20. Fold the right half from the back and fold it to the left. 2 1. Fold up the right part.

22. Open the crease folded in the previous step. 23. Fold the upper part on the left to the right. 24. Fold the crease made according to step 2 1 so that the narrow part on the right is vertical.

25. Then fold the right part in half to the left. 26. After opening the long and narrow part, fold the horizontal crease to the vertical position as in the picture. 27. Fold the back as well. After folding, it will look like in the picture.

28. The triangle on the left in the picture should be made into a tail, and this part should be folded inward continuously to a certain extent, and the degree of folding can be determined by looking at the final finished picture. 29. The outer triangle also needs to be folded continuously.

30. This is more like a tail. 3 1. At the other end, turn the small sharp corner up a little, then fold the back part continuously, and the head of the origami puppy has come out.

32. Just like this, paint the small triangle folded in the last step black, stick it on your eyes, and then adjust the shape of your head to be perfect.

How to simply fold origami puppies and children's handmade puppies?

1. First, fold the top edge and bottom edge of the square paper in half, then unfold it to leave a crease in the middle, then fold the right and left in half, and then unfold it to leave a crease.

2. Fold the left and right top corners to the middle. 3. Then spread out the two corners of the previous operation.

4. Fold the two corners formed inside at this time outward. 5. Fold the left and right top corners inward.

6. At this time, notice that there is a more complicated operation. The openings on the left and right sides are unfolded as shown by the thick white arrow, and the two small sides are folded upwards as shown by the black arrow. 7. Turn the origami model over.

8. Fold the left and right corners to the middle. 9. It can be seen that the origami model now has two small corners protruding below. Fold these two small corners upwards.

10. Then fold the triangular origami model to the middle. 1 1. Then turn back the top corner of the origami model.

12. Fold the left part of the origami model backwards to make a double fold. 13. Then rotate the origami model clockwise.

14. Fold the paper on the upper surface of the origami model from the right to the left according to the position shown by the thick white arrow. 15. Then turn back the paper exposed at this time.

16. Then fold the lower left corner of the origami model once to make a crease. 17. Then turn the left corner upward to form a small upturn.

18. Finally, draw the face of the hand-made origami puppy with a drawing brush, so that a complete hand-made origami puppy is made! .

How to fold kittens, rabbits and puppies with paper?

The folding steps of the cute three-dimensional kitten are as follows: 1. 1 piece of small strip paper.

2. Fold it in half. 3. Fold it in half.

Step 4 open it. 5. fold it up.

6. The middle line, extend it and fold it. 7. Open them all.

8. Fold according to the existing line. 9. Compaction.

10. Top open. 1 1.

12. Fold in the upper ear and flatten it, so that the whole can be flattened. 13. After both ears are ok, the lower body is also folded in half.

14. In this way, the other half is the same. 15. Put the big head and the small head, and fold back to lock the ears.

16. Fold the body and tail below. 17. The proportion is fixed by yourself. There is a seal on it. Open it.

18. Pinch out the tail. 19. When viewed from the side.

20. Fold it to the back. 2 1 done.

The specific steps of three-dimensional dog origami are as follows: 1. First, fold a diagonal line. 2. Fold four bisectors with diagonal lines and fold another diagonal line.

3. Combine the four bisectors. 4. The middle paper corner is flattened upwards.

5. Fold the bisector of the middle paper corner (the left and right sides are consistent). 6. Use the angle bisector to fold all the paper layers, and at the same time fold the right side of the mountain, and put it back as a whole (red line mountain fold, blue line valley fold).

7. After you put it away, it will be like this. 8. The upper paper corner is slightly opened and folded outward, and the distance is appropriate to expose the small sharp corner of the ear.

9. The tail at the right end is folded to the left. 10. Fold the tail to the inside with the crease in the previous step.

1 1. The tip of the tail is folded back to the right. 12. Fold the paper layer on the front leg to the back along the ear mountain.

13. The tail tip is turned up. 14. Align and fold the corner of the head paper to the right, roughly halfway to the ear.

15. Fold off the sharp corners again. 16. Make use of the creases in the last two steps to make the inner W-shaped segment fold 17. Fold the tip into the valley twice to form the nose.

18. The folding step is completed, and then three-dimensional plastic surgery is started. If the paper is absorbent and flexible, you can use a napkin to wet it and shape it.

Generally, white glue is used to stick the opening of the paper layer on the head and back, and then push it down. 19. bend the head inward to form the curve of eyes, back and legs.

20. Pay attention to the valley state of the head segment. 2 1. A MengMeng puppy did just that.

The folding steps of the three-dimensional rabbit are as follows: 1. Fold the square paper in half at opposite corners, then open it and fold the folding line inward along the center. 2. Fold the two corners of a triangle to the center line.

3. Fold the corners of the two small triangles in half as shown in the figure. 4. After folding, triangle the refolded side, and then plug it in. This step is to prevent the rabbit from scattering easily.

5. Turn it over, as shown in the figure, and fold the triangle until the two sides of the center line are symmetrical. 6. Fold the extra part back to become the figure below. 7. You can see that there is a crease in the middle, then fold the two sides to the crease and align them, turn in one direction as shown in Figure 1, draw your eyes and blow into the rabbit's mouth.