The office address of Akiyama Printing Machinery Manufacturing Shanghai Co., Ltd. is located at No.258, Ding Jian Road, Fengjing Town, Jinshan District, Shanghai, China International Economic, Financial, Trade and Shipping Center. It was incorporated in Shanghai Administration for Industry and Commerce on August 2, 2006 with a registered capital of 8.48 million US dollars. During the 65,438+05 years of the company's development.
We always provide customers with good product and technical support and perfect after-sales service. Our company is mainly engaged in the development and manufacture of printing machinery and industrial nails, providing after-sales service and selling our own products.
Precautions for starting the press:
Check the layout for damage, warping, dry ink, dirt and other phenomena. If it is unqualified, the staff in the printing room will be responsible. At the same time, it should also be noted that if any abnormality is found in the process of picking up the board, it must be handled immediately by the template personnel, then taken to the machine and reported to the team leader. The foreman should truthfully reflect the problem and delay time in the report and report to the foreman, who should truthfully reflect it.
Verify whether the viscosity is within the control range of 20 seconds plus 5 seconds, and record, mix color ink and color card, reduce bag residue, greatly reduce solid waste, improve workshop environment and simplify ink supply. Built-in sensor is used for real-time detection, automatic bag locking and taking, reducing labor intensity, uniform ink squeezing and adjustable speed, suitable for 13kg bagged ink.
Say goodbye to the traditional ink technology and use mode, and keep up with the pace of the new technology era. Reduce pollution, save costs, create new industrial intelligence processes, and help enterprises improve productivity and efficiency. Align the center line of the plate with the center line of the drum up and down. The big board should be reinforced with transparent adhesive, not with double-sided adhesive. Ensure that the undercut direction is the same as the leading edge direction of the paperboard in the previous flat rolling sequence.
Manually place the tailgate according to the width of the cardboard, loosen the locking pin, adjust the position, and then lock the locking pin 8. Just press the start button once, and then press it again after 3 seconds. Don't press it continuously. Press the feedone diagram on the control panel, put in a piece of cardboard, and press the stop button after the cardboard passes through the machine.