At present, many soymilk machines can soak and grind beans themselves, then filter them into soybean milk and boil them automatically. This kind of soymilk machine is especially convenient for people who like to drink soybean milk. However, after the soymilk machine finishes soymilk, it is easy to have residual bean dregs on the filter screen and it is not easy to clean it, which will affect the result of the next soymilk beating. So how to clean the filter screen of soymilk machine is better? How to clean the filter screen of the soymilk machine

1. Fire roasting

Before cleaning the soymilk filter, drain the filter. Then put the screen on the fire to bake. The trick to clean the soybean milk filter is to bake it. Because the calcium and protein on the filter will fall off after baking.

2. Pat

Do not rinse with water immediately after baking. After cooling the soybean milk filter, pat the net bag hard. Just remove the dust and impurities from the net.

3. After soaking

and catching fire, if a small amount of impurities still adhere to the filter. You can prepare some white vinegar and water after dilution. Dip the soybean milk filter into clean water, and then scrub it slowly with a brush.

4. Drain

After soaking for 2 minutes, remove the filter. At the same time, clean the attached impurities repeatedly with clean water. Finally, drain the soybean milk filter and dry it to complete the cleaning. Tips for cleaning the filter screen of soymilk machine

1. Put the filter screen into the basin, put pure water into the basin, soak it in water, wait for a long time before it soaks, and then brush it repeatedly with a toothbrush. In addition, soybean milk must be washed immediately after use. After a long time, it is difficult to clean.

2. firstly, clamp the filter screen with pliers, burn it on the stove, and then wipe it clean with stainless steel wire balls.

3. eggshells can also be used. Cut the eggshell into irregular pieces, put it into the soymilk machine, then turn on the machine and make it rotate, and wait for a few minutes to clean the soymilk machine.

4. After cleaning with a toothbrush, the bristles will become hard, clean them in time, and soak them in white vinegar after brushing.

5. Add edible alkali to hot water, soak the filter in it for half an hour, and then it will be easier to clean.

6. First remove the filter screen, wrap it in the newspaper, then wrap it in a towel, put it in the washing machine, adjust it to the drying procedure, and then take it out after drying. How to clean the soymilk machine

The most difficult part of the soymilk machine is the filter screen and the machine head. When cleaning the filter, it is best to use a soft brush and clean water. If there are a lot of bean curd residue hanging on the filter screen, you can't wash it with clean water. You can take a basin of water, add a little salt, then immerse the filter in it and wait for ten minutes before scrubbing. When cleaning the nose, only the lower part of the nose can be washed with water. Do not immerse the machine head in water or wash the upper part of the machine head with water, otherwise it will easily damage the circuit and affect the normal use.

It is best to clean the soymilk machine immediately after making soymilk, so as not to increase the difficulty of cleaning after the soymilk is cooled and solidified. Unplug the plug before cleaning to avoid live operation. Then take out the machine head, blade, filter screen and heating pipe and clean them separately. After cleaning, open the cover of the soymilk machine and let it dry for 1 to 2 hours. After the water completely evaporates, reassemble the parts into the soymilk machine to avoid leakage or short circuit caused by water and other reasons when it is used again.