Lotus head has a variety of different types, manufacturers of different designs, resulting in lotus head disassembly is not the same. For most of the lotus head, the lotus head is the use of movable design, just turn the rotary button of the lotus head can be directly unscrewed; there is a part of the lotus head design is relatively complex, you need some tools to assist in order to dismantle the head of the lotus head; some of the lotus head design can not be dismantled the lotus head, this time you need to dismantle it, but after dismantling it, you can not use it. So rabbit to remind you, lotus head to buy the best after the manual to stay, easy to later have a problem when you look at the manual.

Two, the cleaning of the lotus head

1. Speaking of the cleaning of the lotus head, in the end, what is the method. If you do not know, you can take a look at it with the editor. The first method, you can to the use of white vinegar to soak. According to the ratio of one to one, pour white vinegar and water, and then put the shower head in the blended water to soak for about 2 hours. This method is still quite effective, white vinegar has a very good stain removal effect.

2. Another way to clean the shower head is a little more complicated. You have to take the shower head apart to clean it. The method of disassembling the shower head depends on the material of the shower head. Plastic shower head can be directly unscrewed by hand, of course, to be very strong people.

After unscrewing, carefully clean its filter and spout. After cleaning it, install it again. If it is a metal shower head, in the dismantling of the hand can not be twisted, to be used together with the relevant tools to dismantle. After dismantling it, you should also clean each water outlet hole carefully. But a lot of stains are not visible to the naked eye, so after cleaning up the holes, it is necessary to use white vinegar to soak.